Patio / July 2, 2018 /
What also causes rollers to jump off track is a bent one. Bent tracks can be either inward or outward and prevent the door from moving all the way on the track. Inward bend, towards the floor, can be repaired with pliers or vise grips by pulling the bend back into place. Outward bend will require pliers, a hammer or rubber mallet to repair it by pushing it down. If a homeowner places something atop the outward bend, it will be easier for the hammer to hit that point and push the bend back into place. Be sure to tap gently and remove the door to avoid damages.
Steel French doors are heavier and offer a solid fit into doorframes that require a measured level of security. Steel French doors are better equipped to resist break ins or similar damage to the structure. Many of the qualities of rust prevention will need to be addressed for untreated doors. Paint prep is a factor similar to wooden doors. The steel French door will need to be pre painted or have adequate priming and curing to prevent the flaking of paint in the future.